The ADMV-3S is specially designed for paint roller handle production with a wide range of forms, sizes and wire diameters. Wire uncoiling via driven coil holder, wire straightening and wire pressing have been taken over from the previous machine model. Newly designed is the bending technology with three servo driven cams, effectively doubling the machine performance!
The wire is paid off from the driven coil holder through a double plane straightening device and length measuring system. The so called wings for holding the plastic handle are pressed, the plastic handles fed from the other side and assembled on the wire. Finally the bending process is made in 3 steps in rapid sequence and the finished paint rollers ejected.
Capacity | approx. 35 - 40 pieces/min. (2,100 pieces/h) |
Wire strength | max. 650 N/mm |
Wire diameter | 6 - 8 mm (0.24 - 0.32"), galvanised steel wire, other diameter on enquiry |
Wire coil | max. 1,500 kg |
Types of handles | to customer requirements |
Hydraulics | 20 MPa |
Air pressure | 0.6 MPa |
Air consumption | max. up to 17 m³/h |
Sound level | 75 dB - measured at distance of 1 m to machine |
Height | approx. 2,200 mm |
Weight | 3,900 kg |
Area required | approx. 7,000 x 2,000 mm |
Electrical connection | 3 x 400 V/50 Hz, N/PE, 17 kW |